Freeview reception at TS14 7ET
For reliable and stable Freeview reception, you need an unobstructed path between the TV aerial on your roof and the digital TV transmitter. The map below shows the transmitters predicted to provide a signal at this location.
You can click on any transmitter symbol to show the coverage area as a green overlay on the map. Double click on a transmitter symbol to go to the transmitter information page.
You can also view the ten closest potential '4G-at-800' mobile phone masts within 1.5km of the selected location - these masts may be used for 4G-at-800 mobile broadband services from 2013-2015.
These icons show the potential locations for 5G-at-700MHz services that may interfere with Freeview reception. For actual mobile device reception prediction (at 800-960MHz and 1710-2170MHz) see these phone operator's mapping sites: Three O2 EE VM
You can click on any transmitter symbol to show the coverage area as a green overlay on the map. Double click on a transmitter symbol to go to the transmitter information page.
You can also view the ten closest potential '4G-at-800' mobile phone masts within 1.5km of the selected location - these masts may be used for 4G-at-800 mobile broadband services from 2013-2015.
map is loading, please wait...
There are 1 mobile phone masts within 1.5km of TS147ET (page shows closest 10)What do the map symbols mean?
EE, Multiple operators, O2, 3, Vodafone, location on line-of-sight, Selected location, Freeview transmitter, Freeview light transmitter, Engineering/fault today.These icons show the potential locations for 5G-at-700MHz services that may interfere with Freeview reception. For actual mobile device reception prediction (at 800-960MHz and 1710-2170MHz) see these phone operator's mapping sites: Three O2 EE VM
Predicted Freeview channel list
| 1 | BBC One (SD) | Guisborough North East and Cumbria | PSB1 | |
| 2 | BBC Two | Guisborough North East and Cumbria | PSB1 | |
| 3 | ITV 1 (SD) | Guisborough Tyne Tees | PSB2 | |
| 4 | Channel 4 (SD) | Guisborough Tyne Tees | PSB2 | |
| 5 | Channel 5 | Guisborough Tyne Tees | PSB2 | |
| 6 | ITV 2 | Guisborough Tyne Tees | PSB2 | |
| 9 | BBC Four | Guisborough North East and Cumbria | PSB1 | |
| 10 | ITV3 | Guisborough Tyne Tees | PSB2 | |
| 13 | E4 | Guisborough Tyne Tees | PSB2 | |
| 14 | Film4 | Guisborough Tyne Tees | PSB2 | |
| 15 | Channel 4 +1 | Guisborough Tyne Tees | PSB2 | |
| 18 | More4 | Guisborough Tyne Tees | PSB2 | |
| 23 | BBC Three | Guisborough North East and Cumbria | PSB1 | |
| 26 | ITV4 | Guisborough Tyne Tees | PSB2 | |
| 28 | ITVBe | Guisborough Tyne Tees | PSB2 | |
| 30 | E4 +1 | Guisborough Tyne Tees | PSB2 | |
| 35 | ITV1 +1 | Guisborough Tyne Tees | PSB2 | |
| 46 | 5SELECT | Guisborough | PSB3 | |
| 101 | BBC One HD | Guisborough | PSB3 | |
| 102 | BBC Two HD | Guisborough | PSB3 | |
| 103 | UTV HD | Guisborough | PSB3 | |
| 103 | STV HD | Guisborough | PSB3 | |
| 103 | ITV 1 HD | Guisborough | PSB3 | |
| 104 | Channel 4 HD | Guisborough | PSB3 | |
| 105 | Channel 5 HD | Guisborough | PSB3 | |
| 106 | BBC Four HD | Guisborough | PSB3 | |
| 107 | BBC Three HD | Guisborough | PSB3 | |
| 108 | BBC Scotland HD | Guisborough | PSB3 | |
| 110 | Channel 4 HD (Wales) | Guisborough | PSB3 | |
| 201 | CBBC | Guisborough North East and Cumbria | PSB1 | |
| 202 | CBeebies | Guisborough North East and Cumbria | PSB1 | |
| 204 | CBBC HD | Guisborough | PSB3 | |
| 205 | CBeebies HD | Guisborough | PSB3 | |
| 231 | BBC News | Guisborough North East and Cumbria | PSB1 | |
| 232 | BBC Parliament | Guisborough North East and Cumbria | PSB1 | |
Advanced options
Show good and blocked paths from TS14 7ET for aerial height of ...10m20m (Angel of the North)25m30m40m56m (Hyde Park Flats, Sheffield)62m (Monument)90m (Royal Liver Building, Liverpool)107m (Meridian Quay Tower, Swansea)115m (Bridgewater Place, Leeds)127m (Glasgow Tower)143m (Guy's Hospital)158m (Blackpool Tower)170m (Spinnaker Tower, Portsmouth)180m (The Gherkin/BT Tower) 193m (Tower 42)235m (Canary Wharf)310m (The Shard)(default view)
Saturday, 13 June 2015
J
jb3811:17 AM
TimH: The content of your update is inclined to suggest that the problem is really being caused by the signal fed into your TV being a tad over powerful for "its" HD tuner to cope with, this resulting in instability in same, the reason for highlighting "its", being that the overload level tuners are able to cope with varies from one brand of set to another, HD tuners being far more critical to this sort of thing over SD, although SD can also be affected if any multiplex channel is being received at a slightly stronger signal level than the others.
If your signal is really strong, purely for a test, you might be able to resolve a picture of sorts by connecting a short length (4 feet or so) of wire into the TV's aerial socket, or better still, if you could access a set top aerial, otherwise you have no option other than to purchase a signal attenuator (around £2-4) to insert in line with the TV's aerial input connection, a value of around 6dB or so might possibly suffice.
By the way, you should also check the set up menu of the TV in question to make sure that it isnt of the variety that incorporates an internal booster facility, if it does, switch it off.
| link to this comment |
Monday, 15 June 2015
J
John h11:39 AM
Hi
I have a Freesat box which I recorded some programs but was unable to watch them while at home so I decided to take my box with me on holiday and tried to watch them on the TV in my accommodation. Unfortunately the box would not play the recordings. Is this because I was not in the UK or is it that the recording is not actually on the box but a link to a recording on the satellite.
| link to this comment |
Friday, 19 June 2015
A
Alan8:13 AM
Gosport
just a change of email address.
| link to this comment |
Alan's: mapA's Freeview map terrainA's terrain plot wavesA's frequency data A's Freeview Detailed Coverage
Saturday, 20 June 2015
T
TimH5:36 PM
Dunoon
jb38:
Many thanks for the suggestions. The main TV is a Samsung UE40C8000 (why they can't choose easier model numbers I don't know). It doesn't say that it has an on-board booster, so I'm assuming that it doesn't. As we can see the transmitter from the window in the lounge, I had thought about buying an indoor aerial to check that the current aerial feed into the lounge socket wasn't the cause of the problem. Will probably do that now. Amazon offer one with a detachable booster at a reasonable price. I think the walls have insulation inside which has an aluminium foil backing, so this may muck up the signal through the wall - siting the indoor aerial on the window ledge won't pass internal approval! But as a temp measure, should be OK. Thanks again.
| link to this comment |
TimH's: mapT's Freeview map terrainT's terrain plot wavesT's frequency data T's Freeview Detailed Coverage
M
MikeB7:48 PM
TimH: The tuners in the Samsung and the Sony might be slightly different, and so your problem might not be showing up on both of them. Sony's are really sensitive but robust (if your HX series is anything like mine), but Samsungs can be a little more skittish.
The Samsung certainly has no internal boosting , but a simple indoor aerial for about a tenner might at least give you a chance to check out the problem. The idea of splitting the signal is a good one (its what I do), because you can see what the tuners are doing seperately. Might be worth changing the fly lead on the Samsung, to see if thats causing a problem.
BTW, the Samsung model no. makes sense if you speak Samsung! Its a European model 40in TV, which came out in 2010 (J is 2015, so work backwards missing out G, since its apparently very rude in Korean). The 8 series is always pretty much the top level Samsung range, and this one has a 200hz screen, which was top notch at the time. Still a very nice set indeed! Add a Freeview HD tuner in some way, and it should fly.
| link to this comment |
Sunday, 21 June 2015
J
jb3812:18 AM
TimH: Thanks for the update re model number etc, and having looked at the manual for the model in question can confirm that its not fitted with a switchable signal amplifier.
As far as your problem is concerned, it certainly wouldn't do any harm to try using an alternative jumper lead such as suggested by MikeB, although if this makes no difference to the problem, then the next stage is to try the set top aerial test, as Samsung HD tuners can, and frequently do, react in an adverse fashion to signals that come into the category of being "slightly over the top" strength wise.
This first witnessed by the fact that when the Craigkelly (Fife) transmitter switched over to high powered operation, a number of viewers in the Leith area of Edinburgh using Samsung devices complained (not via website) that their HD reception had vanished, attenuators in line with the aerial rectifying the problem.
Not saying that this is definitely the reason for your problem, but the possibility of it being has to be eliminated from the equation.
PS: I fully appreciate what you are meaning by - siting the indoor aerial on the window ledge won't pass internal approval! - but though as you have said, its only being done as a temporary temporary measure.
| link to this comment |
Thursday, 25 June 2015
T
TimH11:20 AM
Dunoon
jb38 and Mike B
Thanks for all your advice, most appreciated. I found a powered signal booster in my box of stuff (don't ask) and connected this before I started to spend more money! To my surprise, when I retuned the Samsung, it found both missing multiplexes. Signal strength on these is now >70% and the BER on the HD multiplex is hovering around 50, so much less than the 2000+ it was before. Both multiplexes have a good picture. Early days yet, but fingers crossed. It must be as you said that the Samsung is a bit more delicate than the Sony in regards signal strength. I can only assume that the high BER was due to the Samsung trying to latch onto what it thought was a weak signal. To copy a song title from the Carpenters, it is good to get "Yesterday once more". Thanks again.
| link to this comment |
TimH's: mapT's Freeview map terrainT's terrain plot wavesT's frequency data T's Freeview Detailed Coverage
E
Eric8:23 PM
I've decided to try attenuator(s) in my co-ax TV aerial lead. I remember seing some simple in-line attenuators (probably on this website), but I have failed to find such a product on the internet. Can anyone point me in the right direction?
| link to this comment |
A
andy8:30 PM
Chester
Eric: 6db Attenuator for UHF TV Freeview Digital Signal | eBay
| link to this comment |
andy's: mapA's Freeview map terrainA's terrain plot wavesA's frequency data A's Freeview Detailed Coverage
M
MikeB9:04 PM
I bought these: 12dB Coax Plug Inline ATTENUATOR: Amazon.co.uk: Electronics
| link to this comment |
Select more comments
Your comment please