All posts by Jeff Glynn
Below are all of Jeff Glynn's postings, with the most recent are at the bottom of the page.As there seems to be spate of aerial distribution amplifiers failing, I would suggest that, if
possible, a passive splitter is tried first. If there is sufficient signal strength, there will my no problems, and nothing to fail. My own setup is configured as follows: aerial to splitter, one side
of which feeds a Panasonic TV, the other side feeding a Panasonic DVD recorder/PVR, the RF output of which feeds a Humax PVR. The signal strength /signal quality bar graph on the
TV and Panasonic PVR shows 100% for both values; the figures on the Humax PVR
shows 79-81% signal strength and 100% for quality.
| link to this comment |
Anyone know of any problems affecting COM7 (BBC4 HD, etc)? Over the past few days it's been very intermittent, sometimes with no signal at all (even through a booster). As it's now listed above at 72 400w (up from 10000) there should be no reception problems. No problems are reported at Mendip. Any information?
| link to this comment |
Update to above: booster only used to check reception: not normally used. All other MPXs OK., just channel 33.
| link to this comment |
Friday 25 November 2011 10:07AM
Kenley
Anybody noticed the drop-off in signal quality
on COM6 (Channel 52) since last retune? I suppose that it will corrected when full power and final channel positions are available next year.