Full Freeview on the Oxford (Oxfordshire, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 51.790,-1.179 or 51°47'25"N 1°10'46"W |  | OX3 9SS |
The symbol shows the location of the Oxford (Oxfordshire, England) transmitter which serves 410,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
Are there any planned engineering works or unexpected transmitter faults on the Oxford (Oxfordshire, England) mast?
Oxford transmitter - Oxford transmitter: Possible effect on TV reception week commencing 15/04/2024 Pixelation or flickering on some or all channels 
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Oxford transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Oxford transmitter?
BBC South (Oxford) Today 0.4m homes 1.6%
from Oxford OX2 7DW, 6km west-southwest (258°)
to BBC South (Oxford) region - 6 masts.
BBC South (Oxford) Today shares 50% content with Southampton service
ITV Meridian News 0.9m homes 3.4%
from Whiteley PO15 7AD, 102km south (182°)
to ITV Meridian/Central (Thames Valley) region - 15 masts.
Thames Valley opt-out from Meridian (South). All of lunch, weekend and 50% evening news is shared with all of Meridian+Oxford
How will the Oxford (Oxfordshire, England) transmission frequencies change over time?
| 1950s-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 2013-18 | 2013-17 | 23 May 2018 | ||
| VHF | C/D E | C/D E | C/D E | C/D E | C/D E T | W T | W T | ||
| C2 | BBCtvwaves | ||||||||
| C29 | SDN | ||||||||
| C31 | com7 | com7 | |||||||
| C37 | com8 | com8 | |||||||
| C41 | BBCA | ||||||||
| C44 | D3+4 | ||||||||
| C46 | _local | ||||||||
| C47 | BBCB | ||||||||
| C49tv_off | C5waves | C5waves | |||||||
| C50tv_off | SDN | SDN | |||||||
| C51tv_off | LOX | LOX | |||||||
| C53tv_off | C4waves | C4waves | C4waves | +BBCA | +BBCA | +BBCA | |||
| C55tv_off | ArqB | ArqB | ArqB | com7tv_off | |||||
| C56tv_off | COM8tv_off | ||||||||
| C57tv_off | BBC1waves | BBC1waves | BBC1waves | BBCB | BBCB | BBCB | |||
| C59tv_off | -ArqA | -ArqA | -ArqA | ||||||
| C60tv_off | ITVwaves | ITVwaves | ITVwaves | -D3+4 | -D3+4 | -D3+4 | |||
| C62 | SDN | ||||||||
| C63 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 14 Sep 11 and 28 Sep 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 500kW | |
| BBCA, D3+4, BBCB | (-7dB) 100kW | |
| SDN, ARQA, ARQB | (-10dB) 50kW | |
| Analogue 5 | (-11dB) 40kW | |
| com8 | (-14.7dB) 17.1kW | |
| com7 | (-14.8dB) 16.4kW | |
| Mux 1*, Mux 2*, LOX | (-17dB) 10kW | |
| Mux C*, Mux D* | (-18dB) 8kW | |
| Mux A*, Mux B* | (-19.2dB) 6kW |
Which companies have run the Channel 3 services in the Oxford transmitter area
|
|
Tuesday, 12 June 2012
M
Martyn7:08 PM
Buckingham
Hi again
Got home from work, looked at Ch53 and it was all back but sound was low. So I fiddled with the scart and lost the picture again. I've now changed the scart and rescanned and all seems back to normal but I wasn't aware that the scart would have this impact. I've now got all channels with Ch53 Oxon & Bucks showing 64% strength and 100% quality. Got any explanations because I'm baffled!
| link to this comment |
Martyn's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
J
jb388:05 PM
Martyn: Well you have good reason to be baffled, as its virtually impossible for what you were moving around to have any affect on the signal level, this making me feel that the second last paragraph in my reply (i.e: out with your control) might well be the case, and with whatever was causing your problem having either corrected itself, or having been corrected.
Just to satisfy my curiosity though, when I had requested that you try a manual signal check on Sandy's Ch27 and you reported back that it was showing 16% strength, could you possibly try that again? as should by any chance you find that it has also come up in strength then that could indicate an intermittent connection problem on your aerial system.
Another thing being, that although you will most likely have already set this to "off", but if your aerial goes through the Humax and then into the TV, check to make sure that you have the "power saving on standby" switched off on the Humax, as that partially kills the aerials RF loop feed to the TV. (this setting under "miscellaneous")
| link to this comment |
M
Martyn8:19 PM
Buckingham
Ch27 is still the same and power saving is off. Ah well, unexplainable I guess. If it goes again I may consider switching over to Freesat and having a new LNB fitted for a PVR as I've only got a single one now. I can't stomach the thought of giving my cash to the Australian phone hacker!
| link to this comment |
Martyn's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
M
Martyn8:20 PM
Buckingham
I meant to say thanks very much for your prompt help and advice too JB. Thanks!
Martyn
| link to this comment |
Martyn's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
J
jb389:22 PM
Martyn: No problem Martyn! and pleased to have been of assistance, as although I mainly deal with non domestic RF equipments I find faults such as yours on the domestic side of things to be much more interesting.
And by the way, your findings on the Ch27 test not having altered any "is" as you will probably have gathered good news, as that indicates that your Ch53 problem "was" caused by external reasons.
Regarding Freesat, its something I have no hesitation about in recommending it to anyone, as its the only mode with a virtually guaranteed 99.9% level of reception reliability.
Quad block kits for a Sky dish can be obtained for as little as £10.00 from a number of e-bay outlets and are simplicity to fit by then virtually being a push fit onto the end of the arm "if" its a rectangular one, or alternatively if its an older dish with a round arm you loosen the 40mm collar clamp and swap the blocks over, then run another coax cable to the lounge or wherever.
Regards / jb.
| link to this comment |
Thursday, 14 June 2012
A
Algernon Black10:36 AM
I see from the Digital TV site that in October 2013 I will be required to re-tune and from that date I will receive fewer channels. Surely this cannot be true!
| link to this comment |
Algernon Black: You haven't provided a link to the said page.
As a test, I entered the post code of The Sherborne Arms into the Digital UK Tradeview predictor:
Postcode Checker - Trade View
The retune in October of next year is because SDN is moving from C62 to C50. At this location the predictor considers the current channel "good" and the future channel "variable".
The predictor, as with any predictor, in no way suggests that anyone "will" or "will not" receive anything. It should merely be taken as a guide, being mindful that there are many many variables, not least that a post code is a massive space where signals vary and of course the fact that Royal Mail does not deliver television signals.
All I would suspect here is that C50 is used by another transmitter and that it has calculated that it may act to degrade reception. That does not mean that it will.
I wouldn't be concerned about what the predictor says; I would just be mindful of it. What matters is what actually happens.
| link to this comment |
Saturday, 7 July 2012
After lots of instability my systems seem to be behaving fine now (all crossed). However I have recently noticed another issue. Some of the stations seem to be transmitting in different picture modes, which can be altered with the handset, but it is certainly a new event.
Any thoughts. Having checked each set the set up is as per correct screen mode.
| link to this comment |
Tuesday, 10 July 2012
W
WB1:57 PM
Lost my TV signal and all stations this morning. I live in Cassington near Eynsham Witney. any others with the same problem?
Regards
WB
| link to this comment |
Saturday, 14 July 2012
D
Dawn Bowsher5:59 PM
Buckingham
I have been having trouble with Samsung Smart TV dropping its channels repeatedly. I have a Humax Fox T2 connected to it and the powersave on standby was set on Humax. I had to call out someone in the end who told me to take the powersave off as this was causing the problem. I did that and have had no problems since. Just thought this tip might help others
| link to this comment |
Dawn's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
Select more comments
Your comment please