All posts by richard
Below are all of richard 's postings, with the most recent are at the bottom of the page.
i can also add that when the 6pm news comes on it changes to cumbria /tyne tees news
| link to this comment |
Reception is holding good despite the crap weather.
No news is good news on the Ch. 60 at800 filter. Not arrived as yet.
I decided to try a different Freeview box, too see what signal and quality I would get.
For the mux channels I can only give u what I pick up from channel Freqs.
for both upstairs and downstairs.
It's still holding for now 94% signal and 84% quality despite the weather that is.
| link to this comment |
Can I pick people's brains since I'm an a qualified electrician, despite the laws and regulations on electronic frequencies, but is it common practice to use wire mess over all electrical outlet. Plugs, switches etc.
Reason for asking is that I spoke to an electrician about this and the results are staggering.
He says due to what they have done by using pvc coving over all electrical outlet this is why the electrical interference. There is no shielding to stop the electrical interference and this I am now stuck with with what he says dead spots. ( Dead zones)
Can this be true as it fits with the problem at hand to what I am experiencing
| link to this comment |
Thank you for your input . If that is not the problem, but as u have said still a mystery
There is no earth bonding to aerial pole.
In regards to frequencies listed it is listed as they are if I have made a mistake then that I apologize for, but it's how my TVs list them as in the order of coms etc.
| link to this comment |
No news is good news Ch 60 filter hasn't arrived as yet still waiting.
Just not sure when this will arrive. May need to give them another ring
| link to this comment |
Hi can u tell me if there is anything wrong with Freeview at bilsdale my aerial is pointing in this direction when it was fitted many years ago.
Channels or mux with problems.
PSB 1
Com 4
Com 5
Com 6
These seam to be on a low output at the moment I am receiving quality 47 signal 63 .
I have picture and sound quality poor, with constant break ups.
This has been happening since yesterday.
Post code ls13 2ss...
I am not pointing towards Emily moor due to my location.
My earial is new aswell as all cables. I am using a amplifier to boost signal and also at800 due to privious interface.
| link to this comment |
Thank you for Ur response. Do we know how long this is gonna last before full power. Lol
Before I forget I was given X2 channel 59 filters
| link to this comment |
Thursday 6 February 2020 11:59AM
hi. i have done a rescan without the aerial attached to wipe the memory of all channels and then did a retune theses are the results from the upstairs tv.
I have decided to use a seperate freeview box
this is a dion 8k bandwidth
psb1 uhf ch21 (682.000 mhz)
psb2 uhf ch24 (658.000mhz)
coms 4 uhf ch43 (594.000 mhz)
coms 5 uhf ch46 (570.000 mhz)
coms 6 uhf ch40 (690.000 mhz)
lls uhf ch55 (618.000 mhz)
coms 7 uhf ch56 (498.000 mhz)
coms 8 uhf ch30 (478.000 mhz)
signal and quality is holding signal 94% quality 84% upstairs
now the downstairs tv
psb 1 uhf ch21
psb 2 uhf ch24
coms 4 uhf ch36
coms 5 uhf ch33
coms 6/7 uhf ch48
coms 8 uhf ch 39
signal and quality is holding signal 100% quality 100% downstairs
u ask the question on what i receive for local news..... NE/C
hope this helps