All posts by andy
Below are all of andy's postings, with the most recent are at the bottom of the page.
Hi Again
I am getting a signal of 89% and a quality of 98% on sagem pvr (4 years old) but no chans 3,4 or 5 after several resets still no luck PE291up andy
| link to this comment |
Hi thank for help Martini did what you suggested and its now working.Thanks again Andy
ps I would have answered sooner but couldn't find way back in to the same list of posts
| link to this comment |
Hi again I was struggling to identify my Ariel even though I had the box the bit with the band type had been torn off with wrapping tape,I looked on antiferance site and found that the lengths varied with type, so with the ladder and tape rule I could have found out.I had brought it cheap from cash convertors as it looked well made (square and round tube and bolted) unlike the thin flat elements and plastic clip-on dipole one that it replaced that had been bent by birds or the wind.
| link to this comment |
Hi from huntingdon (sandyheath) I'm using a sagem pvr6240t.I can get good signal 90% on c24 but after lots of resets,retunes and manual retunes all mux c24 stations are still missing, I have all the others that I can get on humax and newer sagem boxes using same ariel feed so guess not an ariel problem. any ideas please. Thanks Andy
| link to this comment |
Thursday 14 April 2011 1:04PM
Huntingdon
Hi Hello
I am having problems with channels 3,4 and 5 at pe291up and at mother in laws address nearby as well. how do I identify my ariel types 1 have. have you got some dimensions so I can check the ones I have to see if they are suitable. Andy