menuMENU    UK Free TV logo Help!

 

 

Click to see updates

What connections are used from set top box to TV (such as SCART) ?

What connections are used from set top box to TV (such as SCART) ?

What connections are used from set top box to TV (such as SCART
published on UK Free TV

You can use the following ways to connect a set-top box to a TV:

1. SCART on STB to SCART on TV. This provides the best possible connection, with stereo sound and "RGB" highest quality connection;

2. SCART on STB to composite on TV. Older TVs without SCART connections usually have "composite" inputs, usually three "phono" sockets (often red, white and yellow). This offers stereo sound and good picture quality. You will need a special cable from a high-street retailer.

3. UHF ("aerial lead") box to TV. This requires that the STB you choose (all Sky, MOST Freeview) has a UHF output. You will need to "tune" the TV into the box, and you will get OK pictures and only mono sound.

If you are stuck with mono or poor quality sound on the TV, you can still use the SCART output (and the same cable as 2) to a separate amplifier to listen in stereo.



All questions
BBC Three Linear channel re-opens1
Removing all barriers to communication between diverse cultures2
How do I get a test card with Freeview3
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau4
Can I receive UK TV in Ghana?5
[][][
In this section
Are all Widescreen TVs digital?1
If you have several TVs at home do you need separate decoders for each set or is2
My video doesn't work with my digital TV box, help!3
Can I use a Freeview box if there is no SCART connector on my TV?4
My TV is NICAM, does that mean I have digital TV?5
Why has my widescreen TV just made everyone look fat?6

Comments
Tuesday, 26 July 2011
J
jb38
sentiment_very_satisfiedPlatinum

4:52 PM

Anne Low: With reference to the issue of the menu, go into the TV's input selector menu and make sure that you have selected the correct HDMI input number that you have used for connection to the Virgin box, auto switching usually being on No1 on many devices, although its not known whether or not this also applies with your set.

link to this comment
jb38's 7,179 posts GB
Wednesday, 10 August 2011
R
Robin
2:41 PM
London

Hi there, I have an old-ish Relisys 15" TV and want to connect a set top box to it - it's picking up all 5 terrestial channels fine. It has only got the Phono (AV1) sockets and no scart (it does have the standard monitor socket for a computer.
I've just bought a TVonics box but can't even get the set-up screen to display - Any ideas? thanks in advance.

link to this comment
Robin's 1 post GB
C
Ciaran
9:15 PM

Hi, can a virgin v box be used as a satellite receiver?

link to this comment
Ciaran's 1 post GB
Briantist
sentiment_very_satisfiedOwner

11:30 PM

Ciaran: No.

link to this comment
Briantist's 38,844 posts GB
Thursday, 11 August 2011
C
carl
8:10 AM

Hi
I have a sky setup in my house with sky installed into all 4 bedrooms. I have a magic eye setup in my bedroom connected by the aeriel rf lead so i can change the tv upstairs. i do not have multiroom installation.
just changed my 14" portbale to a 22" samsung led tv and when watching sky in the bedroom i get no voice just the soundtrack ?
i know that the signal is going to be mono but why would i not get sky movies playing on tv like they do elsewhere. isnt the case on other channels just on movies ?
any ideas would be greatly welcomed

link to this comment
carl's 1 post GB
Monday, 15 August 2011
Briantist
sentiment_very_satisfiedOwner

7:55 AM

Robin: You will need to use a SCART->phono adaptor such as
SCART to Phono OUT Adaptor : Connect SCART : Maplin
to put in the set-top box.

link to this comment
Briantist's 38,844 posts GB
Briantist
sentiment_very_satisfiedOwner

9:08 AM

carl: The usual reason for this would be that you have enabled one of the "Dolby" modes, but do not have a suitable amplifier. If you can see "Dolby" in the TV's "Sound settings" menu, turn it back to "stereo".

link to this comment
Briantist's 38,844 posts GB
Friday, 19 August 2011
S
sparky
7:04 AM

To jb38, took some time to get my shit together but got there in the end. System works a treat. Bought myself wireless as well, many thanks,Sparky

link to this comment
sparky's 2 posts ES
Saturday, 20 August 2011
D
Dawn
3:59 PM
Nottingham

I have just purchased a Technika HD ready TV with built in Freeview. How do I connect this TV through my existing virgin media box? I have tried to connect the TV through the box and bypassing the box but just keep receiving 'no signal'. Am I being thick or what? I have used the aerial connection on the box to the TV and have also tried connecting with a scart lead to the TV, both things have sadly failed!

thanks

link to this comment
Dawn's 1 post GB
Tuesday, 23 August 2011
A
Anne
12:01 PM
Dalry

Ariel on roof KA24 4DQ
since digital changeover I have not been able to get freeview picture & sound.
Ariel has been checked by tv engineer where it comes into house and is ok.
when freeview box is connected up it detects 81 channels but gives a message saying no ariel connection.
Please tell me how to sort this out, have tried it on two different tvs and get same message.

link to this comment
Anne's 2 posts GB
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.